Make it your own.
A useful upgrade can start with a small idea. We use 3D printing to turn sketches into prototypes, explore new designs, and respond to customer feedback. Now you can build on that work.
Explore printable bases, replacement keyboard feet, and new accessory designs. Download a model, print it, and share what you learn.
Ideas that keep evolving.
See how our design work, customer feedback, and printable accessories come together—from the first sketch to a setup you can customize.
Choose your angle.
Tilt your PERIMICE-822 front to back with 4° or 8° bases, or sideways with 5°, 10°, 20° or 30° bases.
4° & 8° front-to-back tilt
Print at 100% scale in millimetres.
5°–30° side tilt
Four bases and a shared adapter.
Print settings
- Material
- PLA
- Printer profile
- Bambu Lab P1S
- Nozzle / layers
- 0.4 mm / 0.20 mm
- Walls / infill
- 4 walls / 20% gyroid
- Top / bottom
- 5 layers each
- Supports / brim
- Off / none
Replacement keyboard feet
Print replacement feet for PERIBOARD-835, PERIBOARD-535 or PERIBOARD-335. Choose −4° or −7° and download both the left and right models.
More PERIMICE-822 accessories
Print an adjustable stand or a palm rest for your PERIMICE-822.
Adjustable printed stand
Five positions: −20°, −10°, 0°, +10° and +20°.
Eight printed parts, with individual STLs and a 3MF layout in the ZIP.
Print settings
- Material
- Unfilled PETG
- Printer profile
- Bambu Lab A1
- Nozzle / layers
- 0.4 mm / 0.12 mm
- Walls / infill
- 6 walls / 99% cubic
- Brim
- 8 mm
Assembly and printing notes
The suggested prototype material is unfilled PETG. Mount the connector to the mouse before attaching the carrier. Support the mouse and loosen the front knob before adjusting; disengage the teeth, set the angle, then re-engage and gently tighten. Do not force it to ratchet or mix parts from earlier revisions.
Modular palm rest
Choose a width from 68 to 108 mm using the middle modules.
The ZIP contains the base, palm modules, connector and retaining keys.
Print settings
- Material
- PLA
- Printer profile
- Bambu Lab P1S
- Nozzle / layers
- 0.4 mm / 0.20 mm
- Walls / infill
- 4 walls / 30% grid
- Top / bottom
- 5 layers each
- Supports / brim
- Off / none
Choose the width and assemble
- 68 mm: no middle; 78 mm: one 10 mm middle.
- 88 mm: one 20 mm middle or two 10 mm middles.
- 98 mm: 10 + 20 mm; 108 mm: 20 + 20 mm.
Remove the central underside rubber cover. Press the separate connector into the bare base’s keyed receiver until its shoulder is seated, using pressure on its rigid centre. Fit this bare base to the mouse first. Viewed from above, align the mouse 45° clockwise, insert, and rotate back counterclockwise. Then slide on the palm modules and fit the two retaining keys. Follow the included guide.
What would you make next?
Share an idea or a photo of your print. Include the product model and the settings you used.
